0.6.1 - First release

0.8.1 - Global update. 
	- RPi Zero W support
	- Compatibility with Cosmostreamer for Osmo
	- very many other features, the same as in Cosmostreamer for Osmo

0.8.3 - Do not update with update file, use full firmware image (cosmostreamer-wired.sdcard.img.zip) !!!
	- SSD free space now on display
	- Camera type, mode, cooperative mode switch from OSD menu fixed
	- ISO, shutter, aperture now can be changed via RC channels
	- Course camera support (Raspberry Pi camera module needed)
	- http://cosmostreamer.local address fixed

0.8.7 - Do not update with update file, use full firmware image (cosmostreamer-wired.sdcard.img.zip) !!!
	- Photo shot modes
	- If custom focus assistant enabled - camera autofocusing after moving ended
	- Video smooth enchanced
	- Photo shoting enchanced
	- Camera model auto detection (camera_type=2 by default)
	- Pan/Tilt/Dutch inversed (can be turned in RC OSD menu)
	- Fw update fixed
	- Recording fixed in Inspire mode

0.8.8
	- Fixed RC PWM, broken in last fw update

0.9.1 - Do not update with update file, use full firmware image (cosmostreamer-wired.sdcard.img.zip) !!!
	- Improved gimbal movement in Inspire mode
	- Video now transmits via Wi-Fi with Rpi Zero W to Windows application
	- Wi-Fi Access Point settings fixed (ssid, pass, channel)
	- Big red label "Replace battery" when < 10% (for do not damage batteries)
	- Added files manager in browser (open http://<ip>/files)
	- Added simple console in browser (open http://<ip>/console)


0.10.2 - Do not update with update file, use full firmware image (http://cosmostreamer.com/wired/downloads/cosmostreamer-wired.sdcard.img.zip) !!!
	- Fixed no camera move from RC
	- Added SBus support. Just connect uninverted wire to UART RX (GPIO15, pin10). Or use invertor for standard SBus signal.
	- New calibration way
	- Many new RC channel functions added
	- Fixed update scripts

0.10.4
	- Added absolute pan/tilt/dutch feature for RC control

0.11.1
	- Fixed Z3 support (50% cases) (Osmo mode - tested, Inspire mode - not tested)
	- Video stream stability improved
	- Added transparent mode for DJI Go bridge
	- Added HDMI video output mirroring
	- Added optional video stream to CosmoViewer (disabled by default, can be enabled in web admin page or in CosmoViewer Windows application)

0.11.2
	- Z3 fixed again???


0.11.4  Still fighting with Z3
	- Fixed Z3 settings lost
	- Fixed Z3 no video displayed (use option "Fix video" in chapter "Display" in windows app or web interface)
	- Added Video flip (good in Inspire mode when camera top-sided)

0.14.5
	- New file browser
	- Data WebSockets server now writte on C++, reduced CPU load
	- Fixed PPM

0.14.7
	- Some fixes for video stability
	- X3 white and Z3 white now works fine in Osmo mode, but need to set option in box settings. "Display" -> "Fix video"

0.14.8
	- Added LED for recording status indication. Blinking when recording is active. Connection: GPIO19 (pin 35). Better to use transistor for do not damage RPI.

0.14.11
	- Fixed potential problem with RC commands overflow
	- Fixed Wi-Fi access point settings